← All articles
23 September 2026 · Kinfoly · Updated 6 October 2026

How to Read a Big Family Tree — Ancestor, Descendant and Hourglass Views

A family tree is a pleasure to look at until about the fortieth person. After that it becomes a wall: cousins of cousins, everyone's spouses, four generations of a branch you were not looking for. The names are all correct, and none of them are the one you want.

The usual advice is to zoom out. That only makes the boxes smaller. What actually helps is the opposite — showing one person's line at a time, and letting you say how far it should reach.

A large family tree with one person's line kept on the canvas and the rest of the tree faded out

The four charts, and what each one answers

Four shapes cover almost everything anyone has ever drawn of a family. The names are worth knowing, because every genealogy program and every print shop uses them.

A pedigree chart — an ancestor chart — goes backwards only: you, your parents, their parents, and so on. Each generation doubles: 2, 4, 8, 16, 32. Six generations is 63 people and still fits on one sheet, which is why researchers live in this one. Every empty box in it is a question to answer.

A descendant chart goes the other way: one couple at the top, then their children, grandchildren and great-grandchildren. It does not grow predictably — a single family of eight children is wider than three whole generations of ancestors — so its size depends on the family rather than on the number of generations.

An hourglass chart puts one person in the middle, ancestors above and descendants below. It is the chart that answers "who is this person to me", because the answer usually runs up one side and down the other.

A fan chart is a pedigree chart bent into a wedge or a full circle, with each generation as a ring. The same ancestors, far less paper, and the usual choice when a chart is going to be framed as a present.

There is a fifth thing you will be asked for, which is not really a chart: a family group sheet — one couple, their marriage, and all their children on a single page. Archives and genealogical societies still run on it.

A big family tree holds all four of these inside it at once. The trick is being able to ask for one at a time.

Pick a person, press F

Hover over anyone on the canvas and the card grows a small row of icons: a pencil to open their page, a bin to remove them, and a third one that looks like a branching diagram. Click it — or select the card and press F — and everything that is not part of that person's line leaves the canvas. Escape, or the ✕ on the bar, brings the whole tree back.

Show in tree, on a person's page, opens their line as well. On a tree of several hundred people, landing on a single card in the middle of a huge canvas is landing nowhere.

Four ways to read a line

Once a line is open, a bar appears on the canvas with four views. They are the four questions people actually ask of a family tree.

Four small trees of the same family — ancestors, descendants, both ways and close family — with Emma Carter outlined in each

Ancestors — the pedigree chart: parents, grandparents, great-grandparents, as far back as your records go. The view to work in while researching.

Descendants — everyone who comes down from the person you picked. The view for a family reunion, or for working out how a distant cousin connects to the founder of the line.

Both ways — the hourglass: ancestors above, descendants below, your person in the middle.

Close family — parents and grandparents, plus the whole line down, and this one spreads: brothers and sisters of everyone it reaches come along too. It is the view that looks most like a family, and the one that prints best on a single sheet.

A dial for how far it reaches

Two steppers on the bar set how many generations the view climbs and how many it descends: a number up to eight, or All. A + on the card at the edge of the view reaches one generation further without touching the dials.

The same line at one generation up and one down, then opened out to the whole line

Beside them the bar counts what the view costs — "5 of 8 people", "34 of 512" — so you always know how much you are leaving out.

Blood relatives only

Blood only drops everyone who married in, including the spouse of the person you started from. It is the switch for a direct-line chart: the line as it was inherited, without the people who joined it. Leave it off and you get the families as they actually were, husbands and wives included.

Finding the person to start from

On a tree with three Marias, finding the right one is the hard part. Press / anywhere on the canvas and a small search box opens over it. It looks through names, and through years as well, because namesakes are told apart by dates rather than spelling. Pick someone and the canvas travels to them; press F to read their line.

Coming back to the same view

A view is part of the page address, which makes it two useful things at once. The browser's back button undoes it — switching from ancestors to descendants and back is a press, not a rebuild. And a view can be bookmarked: save the six generations above your grandmother, and tomorrow it opens exactly that. Your tree stays private either way; the address only shows it to someone who could already open it.

What you see is what prints

The print panel takes whatever is on the canvas — the person, the view, the depths, the number of people — and prints that. Pick the line, set the dials until it reads well, then send it out as a vector PDF that comes out at the size you ordered: A4 up to A0, US Letter or Tabloid, or a sheet grown to fit the drawing. A poster too big for your own printer can be cut into A4, A3, Letter or Tabloid sheets to tape together.

Common questions

What is the difference between a pedigree chart and a family tree?

A family tree holds everyone you have recorded, in every direction. A pedigree chart is one view of it: one person's ancestors only, each generation doubling — parents, grandparents, great-grandparents. The tree is the data; the chart is a way of looking at part of it.

What is an hourglass chart?

One person in the middle, their ancestors above and their descendants below, so the drawing narrows at the waist. It is the chart that answers "who is this person to me", because the answer usually runs up one side of it and down the other.

How many generations should a family tree chart show?

As many as stay readable on the sheet you intend it for: about three generations of ancestors on A4, four on A3, five on A1, six on A0. On screen it is a different question — show one or two generations while you are checking a branch, and the whole line when you want the shape of it.

How do I find one person in a tree with hundreds of people?

Search by name and by year together: in a tree with three Marias, the dates tell them apart and the spelling does not. In Kinfoly, press / anywhere on the canvas, type either, and the canvas travels to whoever you pick.


One rule holds under all of this: nothing is hidden from your data, only from the canvas. A view is a way of looking, never a filter that removes someone from your tree. Close it and everyone is back. It all works on a phone, too, pinch to zoom included.

If you are just starting, the free online GEDCOM viewer opens a file you already have in the browser without an account — and what a GEDCOM file is explains what is inside it. The built-in assistant can build the tree from a sentence when you would rather talk than click.

See your own family one line at a time
Create a free account, import your GEDCOM file or add a few people, then pick anyone and press F.