How to Print a Family Tree Poster — Sheet Sizes, Paper, and a PDF That Comes Out Right
Printing a family tree is not really a printing problem. Any copy shop can put ink on a large sheet, and they do it every day for architects and estate agents. The hard part happens before that: producing a file that is the size you asked for, with lines dark enough to follow across a metre of paper and names that did not get shortened to fit.
This guide covers the decisions in order — sheet size, home or shop, paper, cost — and the handful of mistakes that send people back for a reprint.
What size sheet do I need?
The limit is not the paper, it is the size of the names on it. Below about 6 pt a name needs a magnifier, which is not what anyone hangs on a wall.
As a rough guide for a chart of ancestors — the kind that doubles each generation — here is what stays comfortably readable:
| Sheet | Millimetres | Inches | Ancestors | Roughly |
|---|---|---|---|---|
| US Letter | 216 × 279 | 8.5 × 11 | 3 generations | you, parents, grandparents |
| A4 | 210 × 297 | 8.3 × 11.7 | 3 generations | the same, a little taller |
| US Tabloid | 279 × 432 | 11 × 17 | 4 generations | adds great-grandparents |
| A3 | 297 × 420 | 11.7 × 16.5 | 4 generations | adds great-grandparents |
| A2 | 420 × 594 | 16.5 × 23.4 | 4–5 generations | a comfortable gift size |
| A1 | 594 × 841 | 23.4 × 33.1 | 5 generations | 16 people across the top |
| A0 | 841 × 1189 | 33.1 × 46.8 | 6 generations | a wall chart for a reunion |
American print services quote posters in inches rather than letters: 18 × 24 sits near A2, 24 × 36 near A1, and 36 × 48 near A0. Ordering by the inch is the same decision in different words.
There is also the other way round — instead of fitting the family to a sheet, let the sheet grow to the family, and take whatever that comes to to a shop that prints from a roll. A chart printed at its natural size needs no compromise about what stays readable.
Charts of descendants are less predictable — one couple with eight children takes more width than four generations of ancestors — so treat the table as a starting point and let the software tell you the real answer. Kinfoly works out the sheet, the scale and the actual size of the names before it makes the file, and says so in plain numbers: "names 9 pt" means readable, "names 4 pt" means pick a bigger sheet or fewer generations.
Print at home, or take it to a shop?
At a shop you get one unbroken sheet, which is what you want for anything that will be framed or given away. Any copy shop with a plotter prints A1 and A0 from a roll. Online print services do the same by post, usually cheaper, and will also mount or laminate.
At home you are limited to A4, A3, Letter or Tabloid, so a poster has to be split across several sheets and taped together. Done properly this looks better than it sounds: each sheet overlaps its neighbour by a centimetre, and you cut along a thin line and glue the strip underneath. Kinfoly can split a poster for you, numbering every sheet, marking where to cut and where to glue, and printing small arrows that say which sheet joins which.
Sixteen A4 sheets make an A0 poster, and about a dozen sheets of Letter make a 24 × 36 inch one. Past twenty sheets the taping stops being fun, and a shop doing it in one piece is worth the money.
What to ask for at the shop
Three sentences cover it:
- "This size, printed at 100%." Not "fit to page" — that is the single most common way a poster comes back smaller than ordered, with the margins eaten and everything shrunk by a few per cent.
- Matte paper, 120–170 g/m² for a wall — a US shop calls the same range 80 lb text to 65 lb cover. Heavier stock if it goes behind glass; plain 80 g/m² copier paper is fine for a working copy you intend to mark up. Matte rather than glossy is the part that matters: glossy paper mirrors the room and makes small names harder to read, not easier.
- No trimming, or trim to the edge of the page. A print-ready file has a white margin of about 10 mm all round precisely so a millimetre of drift takes no names with it.
What it should cost
An A3 is pocket change. An A1 or A0 poster from a copy shop or an online service usually runs $10–25, and framing costs more than the print.
That is worth knowing because the specialist family-chart services charge from about $40 for a small printed chart up to several hundred for a designed one, and most of them do not sell you the file at all — the PDF is only a proof. MyHeritage closed its own poster printing in 2023 and now points customers at one of those services. If you have the file, you are paying copy-shop prices for the same paper.
Why so many family tree PDFs print badly
Four failures account for nearly all of them, and all four are properties of the file rather than the printer:
The page is not the size you asked for. You order a 20 × 15 inch chart and the shop opens a Letter-sized page with your chart shrunk onto it. The page box inside the PDF is what the printer obeys; if it says Letter, that is what you get.
The chart is a picture, not a drawing. If the file holds a screenshot, enlarging it to poster size gives you soft, pixelated names. A vector PDF holds the lines and the letters as instructions, so an A0 print is as sharp as an A4 one. You can tell them apart in a PDF reader: if you can select a name with the cursor, it is text.
The connecting lines are too pale. Hairlines that look fine on a screen can disappear on paper at a metre's distance, and this is the most common complaint from older relatives reading the finished chart.
Names are silently shortened. Some programs shrink the text to fit a fixed box, or cut it to "Chernyav…" and say nothing. A long surname should wrap and the box should grow.
Kinfoly's files are vector, carry a page box that matches the ordered size to within half a millimetre, embed their fonts — so names in Cyrillic, Polish or German print on any shop's machine — and let the boxes grow to fit the names rather than cutting them.
Before you send it
- Open the PDF and check the page size in the reader's document properties.
- Select a name with the cursor. If it selects, the text is real.
- Look at the smallest names at 100% zoom, not fitted to your screen.
- Decide what the living should show. A poster hangs where visitors see it, and a birth date is more personal than a name — Kinfoly leaves living people's dates off by default, and can leave all the dates off if you want the shape of the family rather than its record.
- Give it a title. "The Carters of Leeds, 1890–2026" ages better than "Family tree".
Common questions
What size paper is best for a family tree?
It depends on how many generations go on it, not on how the poster will look. Three generations of ancestors are comfortable on A4 or US Letter, four on A3 or Tabloid, five on A1, and six on A0. Beyond that the names fall below 6 pt, and a chart nobody can read without a magnifier is a chart nobody reads.
How much does it cost to print a family tree poster?
An A1 or A0 poster from a copy shop or an online print service is usually $10–25, and A3 is pocket change. Framing costs more than the print. Specialist family-chart services start around $40 for a small chart and run to several hundred for a designed one, and most of them do not hand you the file.
Can I print a large family tree at home?
Yes, by splitting it across several sheets and taping them together. Each sheet overlaps its neighbour by about a centimetre; you cut along the trim line and glue the strip underneath. Sixteen A4 sheets make an A0 poster. Past about twenty sheets it stops being worth the evening, and a shop printing it in one piece is worth the money.
What file should I give the print shop?
A vector PDF whose page size is the size you ordered, with its fonts embedded. Ask for it to be printed at 100%, not "fit to page" — "fit to page" is the single most common reason a poster comes back smaller than ordered. A screenshot or a JPEG enlarged to poster size gives soft, pixelated names.
Should a printed family tree show living people's dates?
A poster hangs where visitors see it, and a birth date is more personal than a name. Kinfoly leaves living people's dates off by default, and can leave every date off if you want the shape of the family rather than its record.
Printing is also the honest test of a tree. Gaps that are easy to scroll past on a screen are obvious on paper, which is why a printed chart taken to a family gathering usually comes home with corrections pencilled all over it. That is the point of it.
New to this? The free online GEDCOM viewer opens a file you already have, without an account — what a GEDCOM file is explains what that file holds — and reading a big tree explains how to pick the branch worth printing in the first place.